[SEL] Water Needle valve on a "M"

MARVIN HEDBERG marvhed at ecenet.com
Fri Oct 8 08:35:10 PDT 2004


rick,
looking at the crank end of the engine,
the grease cup for the cam is below the LH main facing straight out the
back towards you. size is 1/8" pipe thread.

marv in minn


> 1921 Ray.  We see no place to lube the camshaft.  Just zerks on the mains
> and cs.
>
> Take Care,
> Rick
>
>
> ----- Original Message -----
> From: "Ray Freeman Portable Line Boring" <plb at iinet.net.au>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Thursday, October 07, 2004 7:44 PM
> Subject: Re: [SEL] Water Needle valve on a "M"
>
>
>> Was it the early M's with Zerks?Mine is 1926 and the cups have IHC
>> symbols
>> stamped on the caps. Interesting info,thanks
>>
>> Ray
>>
>> Portable Line Boring
>> http://www.plb.iinet.net.au
>> plb at plb.iinet.net.au
>> ----- Original Message -----
>> From: "Richard Strobel" <Richard_Strobel7 at msn.com>
>> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>> Sent: Friday, October 08, 2004 7:37 AM
>> Subject: Re: [SEL] Water Needle valve on a "M"
>>
>>
>> > There ya go Ray.  This 1.5 hp has what looks like old style zerk
>> grease
>> > gun fittings.  They look OEM and according to John H., they did come
>> > with
>> > zerks.
>> >
>> >  John, appreciate the time and trouble spent coming up with and
>> editing
>> > the pix's.  Thanks much and I'm sure Cork will feel the same way.
>> >
>> > Take Care Guys,
>> > Rick
>> >
>> >
>> > ----- Original Message -----
>> > From: "Ray Freeman Portable Line Boring" <plb at iinet.net.au>
>> > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>> > Sent: Wednesday, October 06, 2004 7:34 AM
>> > Subject: Re: [SEL] Water Needle valve on a "M"
>> >
>> >
>> >> The needles on mine are brass. Can it be drilled out? All the engines
>> I
>> >> have
>> >> seen have cups on the mains. Mine even has a grease cup to lubricate
>> >> the
>> >> camshaft where it exits the side plate. There was no bush or bearing
>> in
>> >> there but as it was worn I machined it and made a bronze bearing for
>> >> it.
>> >>
>> >>
>> >> Ray Freeman
>> >> Portable Line Boring
>> >> http://www.plb.iinet.net.au
>> >> plb at plb.iinet.net.au
>> >> ----- Original Message -----
>> >> From: "Richard Strobel" <Richard_Strobel7 at msn.com>
>> >> To: "SEL email discussion list" <sel at lists.stationary-engine.com>
>> >> Sent: Wednesday, October 06, 2004 9:18 PM
>> >> Subject: [SEL] Water Needle valve on a "M"
>> >>
>> >>
>> >> >  For my machinist friend Corky, alias Spud.....soon to join the
>> SEL.
>> >> >
>> >> >  On his 1.5hp low tension IHC "M", the water needle valve is broke
>> >> > off
>> >> > with half of it still inside the mixer.  Any suggestions on how to
>> >> > get
>> >> > it
>> >> > out? He wants it original.
>> >> >  Also were zerk grease fittings OEM on the mains?
>> >> >
>> >> >  We looked at a greased up cc breather yesterday and now understand
>> >> > why
>> >> > they're so pricy.
>> >> >
>> >> >  Does anyone have a picture of the water injection "Check valve"
>> >> > affair
>> >> > in
>> >> > the mixer?
>> >> >
>> >> >
>> >> >  Thanks much gang.
>> >> >
>> >> > RickinMt.
>> >> > http://community.webshots.com/user/stroberc
>> >> > _______________________________________________
>> >> > SEL mailing list
>> >> > SEL at lists.stationary-engine.com
>> >> > http://www.stationary-engine.com/mailman/listinfo/sel
>> >> >
>> >>
>> >> _______________________________________________
>> >> SEL mailing list
>> >> SEL at lists.stationary-engine.com
>> >> http://www.stationary-engine.com/mailman/listinfo/sel
>> >>
>> > _______________________________________________
>> > SEL mailing list
>> > SEL at lists.stationary-engine.com
>> > http://www.stationary-engine.com/mailman/listinfo/sel
>> >
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>




More information about the sel mailing list