[SEL] old engines on Propane question

[David Everett]

Hi One and All

And Jerry Howells' web site is:

http://www.jerry-howell.com/

He is a very well respected model engineer.

Regards

Dave
Saudi-Arabia-On-Sea


 --- Wayne Thackery <wayne at lorenssanitation.com> wrote: 
> 
> Greetings Harry,
> 
> The address below for Richard is still a good one. His phone # 541-367-4902
> or you can send him an e-mail at pattyw at proaxis.com
> 
> Wayne A Thackery
> 
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Steve Gray
> Sent: Saturday, November 20, 2004 9:49 PM
> To: The SEL email discussion list
> Subject: Re: [SEL] old engines on Propane question
> 
> 
> Hi Harry -
> 
> My ignition parts and (indirectly) the plans for the demand valve came
> from a gent in Colorado. I'm fairly sure he's the one that supplied the
> valve info, since I actually got the plans from a fellow model builder
> here in this area. The address I have is:
> 
> Model Project Plans & Kits
> Jerry E. Howell
> 3980 Becket Drive
> Colorado Springs, CO  80906
> 
> The blue prints for the valve were originally conceived and drawn by:
> 
> Richard Williams
> 39459 Crawfordsville Drive
> Sweet Home, OR 97386
> 
> I have no idea if this guy is still at this address. I just put up 3
> pictures of the valve I made at:
> http://www.oldengineshed.com/snapshot/valve1.jpg
> http://www.oldengineshed.com/snapshot/valve2.jpg
> http://www.oldengineshed.com/snapshot/valve3.jpg
> 
> The four 6-32 screws will eventually be steel 6-32 miniature bolts.
> 
> The Blackstone is a 3 1/2 HP gasoline only. Sure runs good! Thanks for
> the compliments.
> 
> TTYL
> 
> - Steve
> 
> --
> Steve Gray
> Member EDGE & TA, Br. 49 & 13
> Sonora, California USA
> e-mail:   segray at mlode.com
> Home page:   http://www.oldengineshed.com
> 
> 
> 
> Harry Terpstra wrote:
> 
> >Hi Steve,
> >
> >Very nice job!!!
> >I also like the way you hide the propane tank.
> >I think in the US you have different gas regulators than we have here.
> >I'll make a picture of our type tomorrow, and I can send it to you (or
> maybe
> >to the SEL?)
> >
> >I also see that you have a Blackstone vertical.
> >We have one, but it's just a little diffrent than yours. Ours is a parafine
> >engine. You can see pictures of it here:
> >http://home01.wxs.nl/~terps027/blackstone.htm
> >I guess yours is gasoline only? You did a GREAT job!!
> >Oh could you pass on the address that suplied you the information?
> >
> >TTYL,
> >
> >Harry Terpstra
> >Sint Annaparochie
> >Netherlands
> >h.terpstra at wxs.nl
> >http://home01.wxs.nl/~terps027/home.html
> >
> >
> >
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>  


		
___________________________________________________________ 
Win a castle for NYE with your mates and Yahoo! Messenger 
http://uk.messenger.yahoo.com