[SEL] Gasket sealing

[Bruce Younger]

>>>Lot of the gummers  prefer grease .
And for good reason .
>>>Chuck

Fitters and boilermakers often use a very stiff grease - a regular putty
knife type scraper isn't stiff enough - on gaskets that get real hot. It
is a major help in getting stuf apart later.

Gasket primer: http://www.mgb.bc.ca/howto/gasket.html

Bruce Younger
Lenexa, Kansas USA
mailto:sluggo54 at hotmail.com
 

CONFIDENTIALITY NOTICE:

This e-mail, including any files transmitted with it, is the property of the City of Lenexa, Kansas.  It is confidential and is intended solely for the use of the individual, or entity, to whom the e-mail is addressed.  If you are not the named recipient, or otherwise have reason to believe that you have received this message in error, please notify the sender at (913) 477-7500 and delete this message immediately from your computer.  Any other use, retention, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.