[SEL] Re: How much gap

[kerogas at sbcglobal.net]

> Is this a technical term?  Are there texts and theories and charts and
graphs and all?
 Could you please go into some depth with a full>>>>

http://www.chem.mtu.edu/~tbco/cm416/cctune.html
why yes , there is Ron  , knock yerself out . I prefer  my math with a pien
.



> There are, and have been, variations of rigging and engineering, but coon
> tuning is new one for me.

    Its  about going slow , and doing so as silently as possible . Ninja
stuff
I wont  go in depth but  ,
There's running O-rings Vs piston rings ,
timing adjustments to compensate ,
some engines require you to
reduce air inlet or run the choke slightly if equipped .
Witness the halfbreeds with head spacers .
Rick brought up the roller to cam / and latch clearances , which are really
fun to tackle
Improper or worn and buzzing gear mesh is another  noisy problem .

  If you have ever been around a pet raccoon their constantly probing ,
inquisitive little human fingers behave similarly to a "coon tuner"
rummaging a flatbed trailer full of parts .Coon tuning is merely a
 more publicly utterable form of another very similar oath .

BTW Ron
Stuck the Texas Seal back on a local fuzzes cheaply made badge about
an hour ago with Goop  !



Chuck®