[SEL] Display opinion needed...

[Steve Gray]

Mornin' All -

   Thanks to all who replied on/off list. I think what I might try, is 
building up a small number of socket mounts and trying it. Not wanting 
to punch any more holes than necessary in the trailer, most all the 
hardware will clamp in place. I forgot to mention, the existing street 
light and post DO all come apart and are removed for transit. In fact, a 
custom enclosure (bin) was built onto the trailer containing a cradle 
that the light gets strapped into. Gives me a place to store spare 
bulbs, too. The light dates back to the late teens early 20s and was 
pulled out of service in L.A. in the 60's, being recovered by my dad who 
worked for the power company (DWP).  It uses a 500w, 115v bulb. I should 
try to get some updated pictures of the whole setup when I have it out 
in a few weeks. Thanks again!

- Steve

-- 
Steve Gray
Member EDGE & TA, Br. 49 & 13
Sonora, California USA
e-mail:   segray at mlode.com
Home page:   http://www.oldengineshed.com



Steve Gray wrote:

> Hi All -
>
>   Some of you out here on the Left Coast have seen this trailer 
> before, but I need some input. I've acquired several old porcelain 
> light sockets and am toying with the idea of mounting several around 
> the edge of the trailer. Questions are: to do it or not; if so, how 
> many, etc. My first opinion is it might be too gaudy, but then 
> again...  If I do install 'em, I'll most likely use the clear 40 watt 
> bulbs, unless the consensus points to something else. There would be a 
> max. 12 in all. All electrical on the trailer is powered by the Lister 
> twin in the center. Any and all inputs, pros and cons, welcome! Thanks!
>
> Pictures are at:   http://www.oldengineshed.com/snapshot
>
> - Steve
>