[SEL] Big engine starting wheels?

[Glenn Wilson]

Does it work flawless or is there a chance it may get sucked in by the Reid?
I thought reid was spelled ried. Hmm. that doesn't look right either. must
be
Reid.

No, I don't remember seeing it or pictures of it.

Glenn

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Bill Boyce
Sent: Monday, July 05, 2004 9:37 PM
To: The SEL email discussion list
Subject: Re: [SEL] Big engine starting wheels?


glenn,, have you seen the removable pony engine bryan and i set up to start
the Reid? maybe this is something similar to what you're wanting to do?
bill boyce

----- Original Message -----
From: "Glenn Wilson" <wilson at stny.rr.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, July 05, 2004 7:17 AM
Subject: RE: [SEL] Big engine starting wheels?


> No - I've been lazy. The head isn't even off it.
> The 60 starts with air :)
>
> I'm mounting a 22.5HP Bessemer on steel wheels and wondering
> how to start it. I'm not as strong as I used to be and I know they turn
> HARD. My little 15HP half breed starts ok but it only has one flywheel.
> I just doubt I can start the 22.5HP myself without help and I'm
> thinking of doing it the easy way with a little engine.
> Glenn
>
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Richard
> Fink Sr
> Sent: Monday, July 05, 2004 9:56 AM
> To: The SEL email discussion list
> Subject: Re: [SEL] Big engine starting wheels?
>
>
> Hi Glenn it appears you may be ready to start that 60 hp??????????????
> R Fink
> PA
>
>
>
>
>
>
> At 11:19 PM 7/4/2004 -0400, you wrote:
> >What suggestions do you folks have for those of us with BIG engines
> >who are going to try starting them with a little engine and a rubber
> >wheel? I know if it is done wrong, it can suck the engine in and bust
> >the flywheel or worse.
> >Thanks, Glenn Wilson
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel