[SEL] NPT taps

[Richard Strobel]

I understood whatcha meant Marv as I've came darn close to sticking one.

  Many thanks to those who replied!!

Headed for the shed.
RickinMt.


----- Original Message ----- 
From: "Dave Rotigel" <rotigel at alltel.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, December 28, 2004 9:43 AM
Subject: Re: [SEL] NPT taps


>
> >be sure to use a 1/4 turn advance-1/3 turn back motion when taping.
> >if you keep taping continually without the forward and back motion on the
> >tap handle, the tap will plug with chips and break. there is no warning
> >either :-))
> >marv in minn
>
> Hi marve, Do you want to rethink this "1/4 turn advance-1/3 turn back"
> advice, or shall we just wait and see how many people are unable to keep
> the tap in the hole while following it?
>          Dave
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>